Control your 3D printer from your favourite Android device and print 3D objects GCodePrintr – The 3D Print App v3.42 Review Latest version for Android. Brief Summary and introduction of GCodePrintr – The 3D Print App v3.42.
Overview & Features of GCodePrintr – The 3D Print App v3.42
So for the latest version of GCodePrintr – The 3D Print App v3.42 APK, You can read a brief overview and features list below.
Overview: Control your 3D printer from your favourite Android device and print 3D objects
____________________
Control your 3D printer from your favourite Android device and print 3D objects
*3D Printing from any Android device – PC less printing
*Connect to a printer using USB OTG/Host port
*Supports wireless printing over Bluetooth
*Load your own gcode file and start a real print from your Android device.
*Touch screen printer control interface (X,Y,Z Movement, Heat, Fan,..)
*Support for SD Card printing (upload, list files, autostart print)
*Easily modify speed during print and see how it impacts the print time.
*Layer by layer visualization and print simulation
*Show details like estimated time, speeds, filament usage, cost,..
*Printing is done in background (Android service)
*Small web interface to remotely view print status.
*Remotely stream the video of your builtin webcam (requires IPWebcam App)
*Receive print object from PC over network
**Use Gcode Simulator for PC to send files from PC directly to your Android tablet to print them.
*Works with many 3D printers (like Reprap, PrintrBot, Ultimaker, Makibox, Solidoodle, Robot3d, Multec Multirap,..).
*Works with multiple firmwares (Sprinter,Marlin,Smoothie,..)
*Support for various printer options (bedsize, baudrates, reset, flip x/y axis,
*Multiple UI Themes (black colorful, gray, autumn, blue fade)
*This version offers full printing support.
IMPORTANT: Before buying this version make sure that your printer connection works with the free version (GCode Simulator (Free) )
Visualization and Simulation
—————————————————–
In addition to the 3D printer control, it can visualize Gcodes and simulate a 3D print .GCode Simulator recognizes the print speeds and can simulate the print in realtime, but you can also speedup the prints (fast forward). Each layer is painted in a different color to see how a layer overlaps with the layer below.
Refer to the homepage for more information: http://gcodeprintr.dietzm.de
Visualization & Simulation Features:
——————————————————-
It analyses the Gcode file and prints additional information like:
*overall print time
*remaining print time
*speed of X/Y/Z movements
*speed of extrusion
*used filament
*yx move distance
*print object dimension
*average print speeds
*number of layers
*layer details
*speed distribution / Acceleration
*weight and price of the printed object
AND MORE …
Remarks and Limitations
———————————–
Developed for reprap printers but reported to work with other printers as well (e.g. Reprap, PrintrBot, Ultimaker, Makibox, Solidoodle, Robot3d, Multec Multirap)
Tested with Slic3r and Skeinforge generated Gcodes.
To load files locally from the device, sd-card or dropbox you need to install a Android file manager (e.g. ES File Explorer)
Only absolut positioning is supported. Gcodes with relative positioning will likely fail.
Loading large Gcode files (multiple MegaByte) might fail, depending on the available memory of the device.
Single extruder simulation only (Print should work for dual extruders as well)
Printer Control Feature requires a android device with USB-OTG support and a USB-OTG cable.
Bluetooth support is still experimental.
PROBLEM SUPPORT
—————-
In case of problems please check on the homepage if the problem is already described.
If not, its best to generate a problem report with the app itself. (long press on console -> send by email)
You can also write an email to [email protected], I’m willing to fix all problems in time.
The collected data is only used to improve the App behaviour.
What’s New
-Additional Russian translation
-Fix some text/layout colors
-Fixed problem with executing macros during pause mode
-Use macros to automatically stop at a given layer, in order to switch filament colors
-New macro PAUSEATNEXTLAYER
-New macro USERINPUT to ask user for e.g. the layer number to pause at
-Overhaul “Resume of a 3D Print”
-Remember last gcode line when stopping/interrupting a print
-Recover the last print position, temperature, etc when resuming a print (with confirm dialog)
This app has no advertisements
GCodePrintr – The 3D Print App v3.42 APK – Technical Details
Before you start full GCodePrintr – The 3D Print App v3.42 App purchase, you can read below technical APK details:
- Full Application Name: GCodePrintr – The 3D Print App v3.42
- Supported Android Versions: Android 4.0.3 and up
- APK File Name: GCodePrintr_3.42.apk
- APK File Size: 7.5 MB
- Official Play Store Link: https://play.google.com/store/apps/details?id=de.dietzm.gcodesimulatorprinter
GCodePrintr – The 3D Print App v3.42 Review
We Hope you liked the brief review of GCodePrintr – The 3D Print App v3.42. Keep visiting to see more updated reviews of GCodePrintr – The 3D Print App v3.42.